Torque Wrenches for Woodworking: Keep Furniture Sturdy (Not Splintered)

Woodworking demands gentle torque—too much crushes wood, too little leaves joints wobbly. A 1/4” drive torque wrench (range: 5–30 in-lbs) is perfect for projects like tables, chairs, and cabinets.

For softwoods (pine, cedar), stick to 5–15 in-lbs—these woods compress easily. Hardwoods (oak, maple) handle 15–25 in-lbs. When using screws, pre-drill holes to reduce torque needs—this prevents splitting, especially near the edge of boards.

For joinery like pocket holes: Set the wrench to 10–12 in-lbs for 3/4” plywood. If the joint gaps, increase by 2 in-lbs (but stop if you see wood bulging). For cabinet hinges, 8–10 in-lbs keeps them secure without stripping the screw holes